The
new system that makes this type of digital printing possible is the RT SunAngel system that includes Transfer paper, Toners in our DayBold
Fluorescent and White, traditional CMYK and white; Laser printers.
Stunning, 2-step process mimics the simplicity of all RhinoTech transfer systems:
This printing
system involves a simple, TWO-STEP process using the A/Image Sheet where you
will print on the smooth side & the B/Transfer Sheet with a white coating.
Step 1: Print design with
DayBold printer on smooth side of A Sheet/Image sheet in a mirror image.
Step 2: Place B Transfer
Sheet in WHITE laser printer to print WHITE portion of design.
Marry
the Image and Transfer sheets. At this point, we like to use a laminator to
make sure that there are no air pockets between the A and B sheets with the
TRANSFER SHEET on top.
After
lamination, place sheets on heat press, fold back a corner so that when it
comes off press, you can HOT PEEL easily starting w/the corner and pulling back
in one smooth motion. Place parchment sheet on top and heat press at 260°,
medium – medium heavy pressure for 40 seconds. Next, trim excess paper around
design on transfer
The final step to beautiful, eye-popping design results:
Next, place dark shirt on press; place
parchment sheet on top of shirt and press
shirt for
a few seconds to remove any moisture and wrinkles. Remove parchment paper.
Place
design on shirt w/parchment paper on top. Press at 260°, medium to high
pressure for 40 seconds. Remove parchment and let shirt cool to the touch (no
more than 60 seconds).
Place shirt
on press so that you have a firm surface in which to peel transfer. Next, place
parchment on top of design. Press again for 20 seconds to make sure that
transfer is embedded deeply into shirt fibers.
Remove parchment and watch YOUR RT SunAngel DARK DESIGN
BRILLIANCE POP OFF THE SHIRT!
If you would like an in-depth discussion on this cool, new system, contact Gregory Markus @ 651-686-5027651-686-5027 x 2 and all these other places:
info@rhinotechinc.com 888.717.4466
No comments:
Post a Comment