Degreaser - DGG² 2200 Degreaser is a ready-to-use, highly effective grease cutting product. It is specially formulated for screen frame cleaning prior to applying emulsion to the screen before each stencil preparation. The product allows for non-abrasive fabric treatment, acting like a wetting agent for use on all synthetic and wire screen mesh. It offers an even sheeting of water for complete uniform stencil adhesion to improve film lamination and bonding of direct photo emulsions. The end result is the removal of dust, dirt, finger prints, oil and other foreign elements.
All-Purpose - APG² 1000 is a high performance, all purpose, water-soluble concentrated Plastisol Ink and Emulsion Remover. It is designed to be used after completion of the print run with the screen frame immersed in a dip tank. Here’s how it works: after completion of print run, the excess ink is removed from the screen and the screen is immersed into dip tank filled with APG² 1000. The product then dissolves the ink and emulsion in under 10 minutes. At this point, the screen is removed from the tank and rinsed with a high pressure cleaner to remove residue ink and emulsion. If a residue stain remains, we recommend cleaning with either SWG 210 or HRG²2400 (see below). APG² 1000 has a higher flash point than lacquer thinner, alcohols, ketones, etc. For use, dilute with water at a 1:15 ratio.
Press Wash - PWG² 122 PressWash is a textile press wash designed to work rapidly and efficiently on Plastisol Inks. It evaporates quickly and leaves no solvent residue on the screen. It is especially ideal for cleaning smeared or dried-in ink off the screen during a press run. It is also the perfect product to use for color changes on press. PWG² 122 has a higher flash point than lacquer thinner, alcohols, ketones, etc..
Press Wash - PWG² 125 Press Wash is a multipurpose, biodegradable press wash. It has proven to work quickly and efficiently on U.V., Solvent and Plastisol Inks to open dried or clogged screen images during and after the production run.
Screen Wash - SWG² 145C Screen Wash is a pleasant smelling, citrus-scented, water-soluble screen wash designed to work rapidly on Plastisol and UV Inks. It has proven ideal for efficient and expedient screen washing after the press run. It affords a higher flash point than lacquer thinner, alcohols, ketones, etc..
Screen Wash - SWG² 305 is a water soluble, Soy Based Screen Wash designed to remove Plastisol and UV ink from the screen frame after the press run. It has proven ideal for efficient and expedient screen washing and has very little odor. This soy-based product has a very high flash point of over 425 F. and meets the new VOC Regulations, Rule 1171. Multi-task with it to help remove minor haze/ghost images.
Screen Wash - SWG² 197C Screen Wash is a water-soluble, multi-purpose Screen Wash Degradent with very little odor. It works rapidly on U.V. and many other solvent-based inks when washingthe screen frame after the press run. It has a higher flash point than lacquer thinner, alcohols, ketones, etc. and evaporates slowly for maximum yield, while leaving no residue on the screen.
Screen Wash - SWG² 210 Screen Wash is a water-soluble, multi-purpose screen wash ideal for expediting screen washing after the press run. It has proven to work rapidly to remove Plastisol, U.V. and many other solvent-based inks from the screen frame. It evaporates slowly for maximum yield while cleaning screen frames without leaving residue behind. The product has a higher flash point than lacquer thinner, alcohols, ketones, etc. It multi-tasks to help remove minor haze/ghost images.